On the problem of interfacial damage in fibre-reinforced composites under variable loads

In this paper, the theoretical background for the failure analysis of fibre-reinforced composites under variable repeated loads in the framework of direct methods is presented. It is based on a local shakedown analysis in a representative volume element of the composite and the use of averaging techniques to study the influence of each component (matrix, fibre and interface) on the macroscopic response of such composite.     

Conjugated turbulent heat transfer with axial conduction in wall and convection boundary conditions in a parallel-plate channel

The steady-state conjugated turbulent heat transfer with axial conduction in the wall and convection boundary conditions is solved with the generalized integral transform technique for the flow of Newtonian fluid in parallel-plate duct. A lumped wall model that neglects transverse temperature gradients in the solid but that takes into account the axial heat conduction along the wall is adopted. Highly accurate results are presented for the fluid bulk and wall temperatures and Nusselt number. The effects of the conjugation parameter, Biot number, and the dimensionless channel length on Nusselt number and fluid bulk and wall temperatures are systematically investigated.     

Computer algebra-perturbation solution to a nonlinear wave equation

In this paper, the higher-order asymptotic solution to the Cauchy problem of a nonlinear wave equation is found by using a computer algebra-perturbation method. The secular terms in the solution from straightforward expansions are eliminated with the straining of characteristic, coordinates and the use of the renormalization technique, and the four-term uniformly valid solution is obtained with the symbolic computation by using a computer algebra system. The comparison of the derived asymptotic solution and the numerical solution shows that they coincide with each other for smaller ε and agree quite well for larger ε (e. g., ε=0.25) Project supported by the National Natural Science Foundation of China and Shanghai Municiple Natural Science Foundation     

3D stress local nondestructive analysis in the middle plane of a plate

The Isodyne technique based on the scattered light scanning from a thin laser beam can be used to obtain the information inside the loaded object in the room temperature nondestructively, so it is a very powerful technique in 3D stress analysis. The problems are how to interpret the information and how to get sufficient information from the few interference fringe. Birefringence phase shift technique can distinguish the fringe orders automatically and enrich the information in 256 gray levels between maxim and minim light intensity. In the paper the Isodyne birefringence phase shift method with an oblique incidence and equilibrium equation is presented, by which the 3D stresses in the middle plane of a plate with U shape notch are separated successfully. The project supported by the National Natural Science Foundation of China under the Grant No. 1380345     

弹性动力学反问题的发展和展望

本文介绍了弹性动力学反问题的理论和方法及其在工程实际中的应用。对本学科的当前发展，重点介绍了Ｂｏｒｎ近似的线性化方法和利用弹性波的层析成象技术的理论基础，同时对一些实验技术作了简要介绍。对本学科的进一步发展值得注意解决的问题作了展望。     

容量矩阵法在涡方法中的应用

本文将容量矩阵技术与快速Fourier变换相结合求解非矩形域的Poisson方程,再与格子涡方法相结合,发展了一套求解复杂外形的快速涡方法。作为算例,计算了有厚度平板和楔形体的分离流动,得到了满意的结果。特别是在垂直平板绕流中,模拟出了由于剪切层不稳定性引起的小涡结构。     

Vibrations of a Floating Elastic Plate Due to Periodic Displacements of a Bottom Segment

The problem of the behavior of a floating elastic thin plate under periodic vibrations of a bottom segment is solved using a numerical procedure based on the Wiener-Hopf technique. The effects of the vibration frequency, the position of the vibrating bottom segment, and the fluid depth on the vibration frequencies of the fluid and plate are studied numerically.__________Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 5, pp. 166–179, September–October, 2005.     

Pressure-sensitive paint in aerodynamic testing

Pressure-sensitive paint (PSP) is a relatively new aerodynamic measurement tool with the unique capability of providing a field measurement of pressure over a test surface. An introductory review of this technology is presented, which is confined to the application of the PSP method to aircraft development wind tunnel testing. This is at present the primary application area and thus the focus of research on the use of the method, and is the authors' own area of research. Described are PSP fundamentals, the various elements comprising PSP technology, and current limitations and considerations in applying this technology. Experimental results are presented to illustrate the present capability of the method. The few publications currently available on this subject in the open literature are also referenced.     

复合结构剪切板的屈曲与后屈曲研究

基于Ｒｅｉｓｓｎｅｒ剪切板理论，本文将现有理论模型推进了一步，导出了控制复合材料和构造矩形板平衡的广义Ｋａｒｍａｎ大挠度方程。此外，运用摄动技术，构造了一个单向压缩简支剪切矩形板的后屈曲渐近解，适用于面板和夹心材料都具正交各向异性的夹层板以及计及横向剪切变形对称铺设的层合板。文中给出了典型算例，并将当前结果与其它理论或数值解作了比较，显示出相当好的一致性。     

云纹干涉制栅新技术

本文介绍了两种新的光栅复制技术,它们具有快速、高质量、低成本、操作简单、使用方便、不需特殊仪器等特点.该技术从我国一般力学实验室条件出发,解决了试件栅制作困难,其中漆栅方法可极大地缩短云纹干涉方法的实验周期,该技术也为光栅测试技术的广泛应用提供了方便.